品 牌:净 魅
TX11 hard stone crystal powder can be used for wet grinding and fine polished stone surface dull. Repair worn surfaces, polished stone surface, increasing its brightness, anti-skid effect.
By combining polishing machine and polishing pad used in combination, it can save cost, time, labor, and machine wear and tear. The stone looks like new, rich layering, to improve wear resistance. It has a stain penetration, anti-scratch surface, anti-skid.
Instructions for use:
Thoroughly clean the stone surface to remove old wax, crystalline powder mixed into a paste with water, and then take this amount of goods, with the use of the polishing pad. In the grinding process, depending on the degree of wear and stone, adding a small amount of water and always keep the surface moist repeatedly ground until the surface crystallization. Use a vacuum cleaner to clean up the residue. Finally, the replacement of the polishing pad grinding, stone is bright as new.
1. Before using the stone must be re-polished or glossy surface, the rough surface of stone largely ineffective;
2. Avoid contact with skin and eyes, away from children's reach and shade;